Cleanroom Workbench

Airflow flows horizontally in one direction, suitable for scenes where products or samples need to be protected.

Airflow flows vertically downward in one direction, which is more suitable for protecting operators from contamination.

Usually a centrifugal fan with large air volume, low noise and stable operation is selected to provide the power of air flow, so that air can pass through the filter and form a stable clean airflow.

Generally composed of primary filter and high efficiency filter to ensure that the air meets the requirements of high cleanliness.

Usually adopts all-stainless steel structure, with movable installation, easy to clean and replace, and has excellent corrosion resistance and easy cleaning.

Including power switch, wind speed adjustment button, lighting switch and UV light switch, etc., which can realize the control of various functions of the workbench.

 Provide a local dust-free and sterile working environment, and effectively remove particles and microorganisms in the air through a high-efficiency filtration system (HEPA or ULPA filter).

The clean room workbench adopts a multi-stage filtration system to ensure high cleanliness.

With enhanced safety protection functions, it can effectively protect operators and the environment and prevent the operation objects from being contaminated.

Adopt modular design, compact structure, strong adaptability, and can be flexibly applied to different scenarios.

Equipped with high-efficiency fans and low-energy consumption design, use long-life filters, and easy maintenance.

Excellent reliability and wide versatility.

It is recommended to turn on the machine 30-60 minutes before operation and turn on the ultraviolet germicidal lamp to sterilize and disinfect the operating area. After the disinfection is completed, turn off the germicidal lamp, and then start the fan and fluorescent lamp. If the clean room workbench is newly installed or has not been used for a long time, it must be cleaned with a clean vacuum cleaner or fiber-free tools before use, and then thoroughly sterilized using drug sterilization or ultraviolet sterilization.

It is strictly forbidden to place items unrelated to the experiment in the operation area to maintain the stable flow of clean air in the work area. During the operation, large movements should be avoided as much as possible to avoid disrupting the airflow pattern. In addition, the operating temperature must not exceed 60℃. All instruments and equipment must be uniformly disinfected before entering the clean bench, and the tools used in the experiment must be wiped and disinfected with alcohol before they can be placed on the workbench.

After use, the waste and experimental residues in the operation area should be cleaned immediately, and the table and instruments and equipment should be wiped with 75% alcohol. Finally, turn off the power switches of the fan, lighting, UV lamp, etc.