240℃ High Temperature Fiber Oven Filter

240℃ High Temperature Fiber Oven Filter
Details:
240℃ high temperature fiber oven filter is an air filtration device used in drying rooms. It is a primary filter with exceptional filtration efficiency and high-temperature resistance. It utilizes synthetic fiber as the filter media, is supported by a high-strength frame, and features a protective screen for enhanced structural stability. It can operate stably and long-term in high-temperature environments up to 240°C.
Send Inquiry
Description
Send Inquiry

Product Definition

 

 

240℃ high temperature fiber oven filter adopts plate type or folding structure.

Folding structure increases the filtering area to cope with large air volume environments.

Both sides of the filter material are reinforced with metal protective mesh such as aluminum mesh, stainless steel mesh or galvanized wire mesh.

Use grid mesh or diamond mesh support to improve overall strength and stability

 

Product Features

 

 

Name

240℃ High Temperature Fiber Oven Filter

Filter Grade

G3/G4

Frame

Aluminum frame, Stainless steel, Galvanized frame

Media

Non-woven synthetic fiber

Color

Brown

Temperature resistance

200℃

Maxi temperature

240℃

Max humidity

≤ 100%RH

Origin

Liaocheng, China

 

Application

 

 

240℃ high temperature fiber oven filter is particularly suitable for coating ovens, industrial drying rooms and high temperature exhaust gas treatment due to its "strong high temperature stability, high filtration efficiency, durable structure and economical cost".

 

Parameter Table

 

 

Nominal Size
W*H*D
(in)
Actual Size
W*H*D
(mm)
Filter Rating
(EN779)
Air Flow
(m³/h)

Initial P.D.

(Pa)

Recommended
Final P.D.

(Pa)

20*20*1 500*500*15 G3 900 50 ≤250
20*20*1 500*500*20 G4 900 45
Due to limited space, the above lists the conventional specifications. For other size parameters, please consult the technicians of SYNRUI Company

 

Product Advantages

 
01/

Outstanding high temperature resistance: long-term stable resistance to 200℃ high temperature, short-term resistance to 240℃ high temperature impact.

02/

Filtration efficiency adapts to the initial efficiency requirements: G4 grade intercepts ≥10μm large particle pollutants with a filtration efficiency of 90%, protecting the back-end precision filtration equipment.

03/

Synthetic fiber filter material has excellent performance: chemical corrosion resistance, low wind resistance and high dust holding capacity, tight fiber bonding, no fiber shedding.

04/

Reinforced structure improves strength.

05/

Adapt to high temperature scenarios: 240℃ high temperature fiber oven filter flame retardant performance ensures safety, moisture-proof and aging-resistant, and easy to install and replace.

06/

Long-term use reduces total cost of ownership.

 

Product Details and Profiles

 
240High Temp Synthetic Fiber Oven Filter Media
High Temperature Fiber Oven Air Filter Frame

 

Production Flow Chart

 

240High Temp Filter Process

 

Surface Cleaning

 

 Non-disassembly cleaning

  • Use compressed air (pressure ≤ 0.4MPa) to blow from the air outlet of the filter to the air inlet to remove the dust on the surface. Note: The airflow direction cannot be reversed to avoid dust embedding in the fiber layer.
  • If the dust is sticky, use a soft brush (nylon material) to lightly brush the surface. Do not use hard objects to scrape.

 Disassembly cleaning

  • Turn off the drying chamber fan, cut off the power supply, and disassemble the 240℃ high temperature fiber oven filter frame according to the instructions.
  • Soak in a neutral detergent (pH 6-8) solution for 10-15 minutes, the water temperature is ≤ 40℃, avoid using strong acids and alkalis (such as laundry detergent, bleach) to prevent fiber aging.
  • Rinse with clean water until there is no foam, place in a ventilated place to dry (temperature ≤ 60℃), and do not expose to the sun or dry at high temperature (to avoid fiber shrinkage and deformation).

 

240℃ High Temperature Fiber Oven Filter Test

 
240 High Temperature Fiber Oven Filter Test1
240 High Temperature Fiber Oven Filter Test

 

Why Choose Us?

 

 

 Choosing us is not only choosing a filter, but also choosing an air purification solution covering the entire life cycle. Please feel free to contact us for sample testing or free solution design. We will use our professional strength to protect your air quality!

Direct supply from the source with no premium

Eliminating the intermediate trading links, the price is 10%-15% lower than the market average for the same quality, saving procurement costs for customers.

Service

We have experienced technology, production, sales and after-sales teams with professional knowledge and rich experience related to products.

Flexible customization service

We can provide tailor-made design solutions based on the size parameters (such as non-standard length, width and height, special interfaces), performance indicators (such as filtration efficiency, resistance requirements), and use environment (such as high humidity and high dust concentration) provided by customers.

Hot Tags: 240℃ high temperature fiber oven filter, China 240℃ high temperature fiber oven filter manufacturers, suppliers, factory, 240 High Temperature Fiber Oven Filter, High Temp Aluminum Alloy Frame Filter, high temp synthetic fiber oven filter

Send Inquiry